BONFIX 71605 Frostproof deluxe outside tap

Description

The built-in KIWA approved check valve prevents backflow of contaminated water.

• Maximum shortening length 15cm
• Synthethic rotating knob
• Single operating key included
• KIWA-certified integrated check valve
• Including hose connector and fixing material

The BONFIX luxury frost-proof wall tap is fitted with a KIWA approved check valve.

Advantages:

Stainless steel wall plate has a pressed-in angle of 2 degrees, so there is always a correct outlet for the automatic drain. To compensate for the 2 degrees of the wall plate, the connection knee 15mm x 18mm has an angle of 88 degrees. The extended compression knee has a KIWA approved check valve from Watts Ocean. If the hole for the copper pipe is drilled in the masonry joint, the 2 holes of the stainless steel wall plate will be drilled exactly into a full masonry brick. The inner side of the chrome-plated body is not chrome-plated along with it, so a good solder joint can be obtained. Stainless steel wall plate is fitted with a lock hole to prevent the tap head from turning with it. For example, when closing or opening. The tap has a supply pipe of 18mm instead of 22mm, so a smaller hole needs to be drilled in the façade. The volume flow is the same as with a 22mm pipe. To protect the copper pipe, it is fitted with a jacket tube. This can easily be shortened to the correct length. The tap is supplied with 2 operating keys. One with screw mounting and one with removable key. The tap head is provided with a warning label, so that the consumer understands the empty dispenser. This label features non-permanent adhesive.

Specifications

Ask a question about this product