BONFIX brass compression fitting ring 28mm

Description

This compression fitting is suitable for several applications, such as heating systems, gas and water pipes.

• Connection: compression ring
• Diameter: 28mm
• Max. working pressure water: 10bar
• Equipped with KIWA approval

The BONFIX compression fitting consists of 3 parts: the housing, the compression ring and the compression nut. This is delivered fully assembled so that it can then be easily connected to the pipe. The compression ring is clamped between the two bores of the compression nut and the housing. By tightening the compression nut, the ring will deform first on the side of the housing, because there the angle of the housing is smaller than that of the nut. By further tightening, the other side of the ring will also be clamped in the nut. As a result, the high pressure on the ring ensures a hermetic seal. As a result, these compression fittings from BONFIX can be used for various purposes, such as gas, water and central heating installations. BONFIX compression fittings are equipped with a brass compression ring. After using the compression fitting, the compression ring cannot be used again.

Advantages of the BONFIX compression fitting range

• The largest and widest range
• Slightly rotating compression nut with locating edge for optimum pipe guidance and sealing
• Can be used on both metal and plastic pipes (with adapter)
• Made from high-quality, self-produced brass
• Easy and fast assembly with standard tools
• Extra ease of assembly thanks to Teflon addition on the threads during nut assembly
• Turned union nut with multiple and dimensionally stable key pockets
• Reuse possible

This compression fitting is suitable for multiple applications with working pressures up to 10bar:

• Closed heating systems (central heating) 0° to +90°C
• Drinking water system (DVGW + KIWA approval) -0° to +90°C
• Gas pipes: -20°C to -60°C (max. working pressure for gas 1bar)
• Closed sprinkler system 30°C

Specifications

Ask a question about this product